Rating/VA |
3000VA/2700W |
Format |
RT3U (Tower/rack3U) |
Topology |
Line-Interactive High Frequency (pure sinewave, Booster + Fader) |
Input voltage and Freq ranges |
160V-294V (adjustable to 150V-294V) 47Hz to 70Hz (50Hz system) |
without battery |
56.6 to 70Hz (60 Hz system), 40Hz in low sensitivity mode |
output Voltage and freq |
230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing) |
Input connection |
1x IEC C20 (16A) socket |
Output connection |
8x IEC C13 (10A) sockets, 1X IEC C19 (16A) socket |
Remotely controlled socket |
2 groups of 2 x IEC C13 (10 A) |
Additional outputs with Hot Swap MBP |
4 AUS 10A + 1 IEC 16A sockets or 6 IEC 10 A sockets or terminal blocks (HW version) |
Additional outputs with FlexPDU |
6 AUS 10A + 1 IEC 16A sockets or 12 IEC 10 A sockets |
Communication ports |
1
USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports
cannot be used simultaneously) + 1 mini terminal block for remote ON/OFF
and Remote Power Off |
Communications card slots |
1 slot for NMC Minislot card or NMC ModBus/JBus or MC Contacts/Serial |
Performance - Safety - EMC |
IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick |
Approvals |
CE, CB report, TÜV |
UPS Dimensions (mm) |
441 x 497 x 130.7 (RT3U) mm |
UPS Weight (kg) |
37.33KG |
|
|
Batteries Typical backup times for 50 and 70% load |
*
Runtimes are shown at 0.7 power factor. Backup times are approximate
and may vary with equipment, configuration, battery age, temperature,
etc. |
5PX |
14/9 minutes |
5PX + 1 EBM |
66/38 minutes |
5PX + 4 EBM |
213/121 minutes |
|
|
Warranty |
3 years on electronics, 2 years on batteries
|
No comments:
Post a Comment